HAVE ANY QUESTION ? +971552247408
The film should be left undisturbed for at least 45 hours after installation to allow the adhesive to fully cure. During this time, moisture trapped under the film may be visible but will naturally evaporate. Any marks or imperfections from the installation process will settle and fade over time. Temperature and environmental conditions may affect the curing period, so variations in drying time are expected. Once fully cured, the matte finish provides durable protection while maintaining a sleek appearance.
The film requires a minimum of 45 hours after installation for the adhesive to bond completely. During this period, moisture under the film may be noticeable but will fully evaporate on its own. Any minor installation marks in the adhesive will settle over time, resulting in a smooth and flawless finish. Temperature and environmental factors can influence the curing duration. Once set, the ultra-gloss surface enhances shine and provides long-lasting protection.
A minimum of 45 hours must pass before film installation to achieve proper adhesion. The film will show moisture beneath its surface until this moisture evaporates completely over time. All installation markings settle down with time to produce a smooth final appearance. The curing process responds to temperature fluctuations and humidity levels, which produce variable drying times. After full curing is complete, the clear satin finish creates a delicate shine that provides lasting protection.
The film requires a minimum of 45 hours of undisturbed time after installation to let the adhesive establish its complete bond. The curing process will cause initial moisture under the film to evaporate completely. During the adhesive curing process natural settling will occur which causes any marks to fade away permanently. Temperature along with humidity can affect the way the curing process completes. After complete settling the black gloss finish creates an intensely glossy appearance with dependable surface defense.
